This Months Body Product Review:
RF Technology "MaxRack" Storage System
for Jeep CJ, YJ, TJ and Samurai Vehicles
Installation of the MaxRack was very easy. The kit included all of the required
hardware and a full set of instructions. The only tools required are a T-55 TORX
socket bit, a 3/8" drive ratchet (or larger), a 4" extension (or longer) and a ˝"
socket. Imagine, a trail kit that does not require the use of a drill or a
hammer!
The first step is the removal of any factory or after market full tops, either hard
or soft. Bikini and safari type tops do not require removal, but it is advisable to
remove any dust covers or tonneau covers.
The next step is to place the rack in position and loosely attach the mounting
brackets to the rack itself. Remove the T-55 screw that is located at the base
of each rear down-tube member of the rollbar. This will be used to secure the
MaxRack in place against vertical movement. If you ordered the rack model for a
hard top TJ, you will need to attach the front mounting points to the center
cross-member of the rollbar assembly. The rollbar is pre-drilled from the factory
for these brackets and the instructions are very clear on how to mount these.
Now simply tighten all the bolts and reinstall any covers or tops that were
removed at the beginning and you’re done!
|