CBrack® Installation
Installed on 1997 Jeep® TJ
By: Bob Flemming
Installation of the CBrack itself is quite simple and takes approximately 15 to 20
minutes. The CBrack installs using the existing screw holes of the footman loop,
located at the top center of the windshield and a strap around the center rollbar.
Detailed installation instructions are included with the CBrack and are very easy
to follow. The CBrack is designed to allow installation with any top (hard or soft),
as long as there is no overhead soundbar mounted in front of the center rollbar
Installing your own accessories and switches is also quite easy, using a drill,
screw drivers and possibly a jig-saw, if you wish to recess-mount your switches.
The lower piece of the CBrack is completely removable, so you do not have to try
and drill or cut overhead. These operations can be completed outside of the vehicle,
the accessory part and switches mounted and then easily wired and installed as a
complete unit.
|
|